Views: 45 Author: Site Editor Publish Time: 2025-11-20 Origin: Site
Pre-Operation & Inspection:
1. Read Manual: Thoroughly read and understand the operator's manual.
2. Visual Inspection: Check for any shipping damage, loose parts, or fluid leaks.
3. Fluid Levels: Add and Confirm all fluids are at the correct level (engine oil, coolant if liquid-cooled, fuel).
4. Battery: Connect the battery, ensure terminals are tight and clean.
Initial Start-up & Break-in:
5. Bleed Fuel System: Purge air from the fuel system by following the manual's procedure.
6. Initial Start: Start the unit and let it run at a moderate speed without load.
7. Check for Leaks: Listen for unusual noises and re-check for any fuel or oil leaks.
8. Gradual Break-in: For the first several hours, avoid maximum load to allow internal components to seat properly.
General Safety:
9. Ventilation: Always operate in a well-ventilated area to avoid fume inhalation.
